Interior paint Mont Blanc

It is a white paint based on acrylic-styrene dispersions, pigments and fillers laminated product that gives optimum coverage, breathable wall, optimal adhesion, very good resistance to washing and ease of application. It is used for painting all surfaces of mineral base: usual plasters, plasters, masonry, stone, brick, slabs of drywall, concrete and also as a renovation paint over old paint resistant.

Surface preparation Base: Paint can be applied to surfaces leveled, clean, dry and load bearing capacity (without substances that may prevent adhesion: grease, bitumen, dust, etc).

Application Instructions: Before use, the contents of the bucket should be mixed carefully. Do not mix with other paints. Whatever their nature, the surfaces must be primed with Acrylic Primer. After applying the primer, it is recommended that its drying time between 4 and 6 hours. The paint is applied by brush or roller, or spray in two layers. Each coat should be applied in a single step (without interruption). If necessary, it can be added up to 10% water to obtain a more fluid consistency, then homogenize.

Surface drying time (to the touch): 2 hours (at a temperature of 20 ° C and a relative humidity of 60%). Total drying time: 24 hours.

Coverage: Mont Blanc paint can cover 12 to 14 m2 / L / layer, depending on the type and quality of support. Perfect cover in a single layer.

Storage: dry place at temperatures between 5 ° C-30 ° C in the original packaging, unopened.

Packaging: plastic bucket with net 15L, 2.5L and 8,5L.

Shelf life: 24 months from date of manufacture in compliance with the provisions of packaging and storage. See the date of manufacture and batch labeled on the packaging.

---

We guarantee that all products purchased on our site are original and comply with the laws of production and distribution

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: