Deprecated: mysql_connect(): The mysql extension is deprecated and will be removed in the future: use mysqli or PDO instead in /home/idepozit/public_html/system/database/mysql.php on line 6
 Naßpolieren Verputz - from category (iDepozit)
Google Translate

Naßpolieren Verputz

Naßpolieren Verputz
Art.Nr. C1525607
Zeitpunkt der Lieferung: 15 days
Verfügbarkeit 1000
Preis 0,66€ /kg
Preis mit Steuer 0,78€ /kg

RRP: 1.01€ /kg

Menge     - oder -   + Wunschliste
+ Produktvergleich
(Mindestbestellmenge 25 Stück)

Putty ready for smoothing and finishing interior surfaces, synthetic resin aqueous dispersion, additives, fillers, with the following caracteristi¬ci: apply easy thanks creamy consistency has very good adhesion to properly prepared substrate, is drying fast, high white. Absor¬bţie represents a base with low and does not require priming before applying paint. Absor¬bţiei reduced because of the composition and provides significant savings in material finish (paint). It is advisable to apply the multilayer coatings may be applied up to 3 mm.

Use: can be applied manually or mechanically on the following formats: cementitious plasters, gypsum plaster-based plasters and cement-based plaster, concrete, gypsum board.

Instructions: The paste is applied to the base surface, in a layer thickness from 0.2 mm up to max. 3 mm. The mechanized application, the product can be diluted with max. 5% water. For application in several layers dry before applying the next layer is the layer above the surface, approx. 2:00, at a temperature of 20 ° C and 65% humidity. The surfaces may be smooth / grind after 12-24 hours (depending on the thickness and tem¬peratură) with fine sandpaper to give a smooth surface. To avoid cracking, prevents rapid drying or freezing. Media less absorbent is the emergence of bubbles and therefore, in this case, plaster will be applied as follows: apply a first coat diluted with 10% water, very thin and, following a slight zvântare (approx. 5 minutes .) to apply the second layer as thin and then, after drying surface (2 hours at 20 ° C tem¬peratură and 65% humidity) apply the final coat of plaster thick finish.

Surface drying time (to the touch): 2 hours, dryness (depth): 24 hours. Values ​​are given for a temperature of 20 ° C and a relative humidity of 65%. Indicative specific consumption: 0.5-1 kg / m². The exact amount of the specific consumption will be determined after a test conducted on the spot. It depends on the thickness and surface roughness. Packaging: plastic bucket, 10 and 25 kg. Storage spaces răco¬roase, dry, Temparature between 5 ° C and 30 ° C in the original packaging, unopened. Shelf life: 24 months from date of manufacture comply with the terms of packaging and storage. See the date of manufacture and batch labeled on the packaging.


We guarantee that all products purchased on our site are original and comply with the laws of production and distribution

Neue Beurteilung

Mein Name


Meine Beurteilung Bitte beachten: HTML ist nicht verfügbar!

Bewertung Schlecht           Gut

Bitte den angezeigten Code einfügen




iDepozit
Str. Balciului, Nr 166, Valcea
: iDepozit.ro
: iDepozit
+04 (0)34 081 4449
+04 (0)770 666 524
RO 34871297
Powered By iPlus.ro
Naßpolieren Verputz - from category (iDepozit)